<ruby id="5b91j"><em id="5b91j"><i id="5b91j"></i></em></ruby>
<em id="5b91j"><b id="5b91j"></b></em>

    <em id="5b91j"><b id="5b91j"></b></em>

    <strike id="5b91j"><video id="5b91j"><cite id="5b91j"></cite></video></strike>
    <dl id="5b91j"><span id="5b91j"><del id="5b91j"></del></span></dl>

    <output id="5b91j"><pre id="5b91j"><delect id="5b91j"></delect></pre></output>

    <ruby id="5b91j"></ruby>

      <video id="5b91j"></video>

      <th id="5b91j"><pre id="5b91j"></pre></th>

        <menuitem id="5b91j"><p id="5b91j"></p></menuitem>

          pcabs合金料塑料 c6600

          pcabs合金料塑料 c6600_價格_物性_圖片_UL黃卡

          pcabs合金料塑料 c6600

          全國24小時銷售熱線:

          0769-83023208

          產品詳情

          SABIC合金塑料PC/ABS Cycoloy C6600物性參數物性表

          SABIC Innovative Plastics Cycoloy? C6600 PC+ABS

          The property table is provided by www.plas-cn.com, welcome to download, reprint please indicate the source!

          Physical Properties物理性質

          Metric公制數據

          English英制數據

          Comments測試方法

          Density密度 

          1.19 g/cc

          0.0430 lb/in3

          ISO 1183

          Moisture Absorption at Equilibrium吸濕平衡 

          0.20 %

          0.20 %

          23°C / 50% RH; ISO 62

          Water Absorption at Saturation飽和水吸收率 

          0.60 %
          @Temperature 23.0 °C

          0.60 %
          @Temperature 73.4 °F

          ISO 62

          Linear Mold Shrinkage, Flow線性收縮率/流動 

          0.0040 - 0.0060 cm/cm

          0.0040 - 0.0060 in/in

          on tensile bar; SABIC Method

          Melt Flow熔體流動速率 

          16 g/10 min
          @Load 2.16 kg,
          Temperature 260 °C

          16 g/10 min
          @Load 4.76 lb,
          Temperature 500 °F

          [cm^3/10 min] Melt Volume Rate; ISO 1133

          Mechanical Properties力學性能

          Metric公制數據

          English英制數據

          Comments測試方法

          Hardness, Rockwell R羅氏硬度

          122

          122

          ISO 2039-2

          Hardness, 硬度H358/30 

          110 MPa

          16000 psi

          ISO 2039-1

          Tensile Strength at Break斷裂拉伸強度 

          50.0 MPa

          7250 psi

          50 mm/min; ISO 527

          Tensile Strength, Yield屈服拉伸強度 

          60.0 MPa

          8700 psi

          50 mm/min; ISO 527

          Elongation at Break斷裂伸長率 

          >= 50 %

          >= 50 %

          50 mm/min; ISO 527

          Elongation at Yield屈服伸長率 

          4.0 %

          4.0 %

          50 mm/min; ISO 527

          Tensile Modulus拉伸模量 

          2.70 GPa

          392 ksi

          1 mm/min; ISO 527

          Flexural Yield Strength彎曲屈服強度 

          90.0 MPa

          13100 psi

          2 mm/min; ISO 178

          Flexural Modulus彎曲彈性模量 

          2.70 GPa

          392 ksi

          2 mm/min; ISO 178

          Izod Impact, Notched懸臂梁缺口沖擊強度 (ISO) 

          10.0 kJ/m2
          @Temperature -30.0 °C

          4.76 ft-lb/in2
          @Temperature -22.0 °F

          80*10*4; ISO 180/1A


          12.0 kJ/m2
          @Temperature -30.0 °C

          5.71 ft-lb/in2
          @Temperature -22.0 °F

          80*10*3; ISO 180/1A


          15.0 kJ/m2
          @Temperature 23.0 °C

          7.14 ft-lb/in2
          @Temperature 73.4 °F

          80*10*4; ISO 180/1A


          15.0 kJ/m2
          @Temperature 23.0 °C

          7.14 ft-lb/in2
          @Temperature 73.4 °F

          80*10*3; ISO 180/1A

          Charpy ImPAct, Notched夏比缺口沖擊 

          1.00 J/cm2
          @Temperature -30.0 °C

          4.76 ft-lb/in2
          @Temperature -22.0 °F

          V-notch Edgew 80*10*4 sp=62mm; ISO 179/1eA


          1.20 J/cm2
          @Temperature -30.0 °C

          5.71 ft-lb/in2
          @Temperature -22.0 °F

          V-notch Edgew 80*10*3 sp=62mm; ISO 179/1eA


          1.50 J/cm2
          @Temperature 23.0 °C

          7.14 ft-lb/in2
          @Temperature 73.4 °F

          V-notch Edgew 80*10*4 sp=62mm; ISO 179/1eA


          1.50 J/cm2
          @Temperature 23.0 °C

          7.14 ft-lb/in2
          @Temperature 73.4 °F

          V-notch Edgew 80*10*3 sp=62mm; ISO 179/1eA

          Electrical Properties電性能

          Metric公制數據

          English英制數據

          Comments測試方法

          Volume ResiSTivity體積電阻率 

          >= 1.00e+15 ohm-cm

          >= 1.00e+15 ohm-cm

          IEC 60093

          Surface Resistance表面電阻 

          >= 1.00e+15 ohm

          >= 1.00e+15 ohm

          ROA; IEC 60093

          Dielectric Constant介電常數 

          2.7
          @Frequency 1.00e+6 Hz

          2.7
          @Frequency 1.00e+6 Hz

          IEC 60250


          2.7
          @Frequency 50.0 - 60.0 Hz

          2.7
          @Frequency 50.0 - 60.0 Hz

          IEC 60250

          Dielectric Strength介電強度 

          17.0 kV/mm
          @Thickness 3.20 mm

          432 kV/in
          @Thickness 0.126 in

          in oil; IEC 60243-1


          25.0 kV/mm
          @Thickness 1.60 mm

          635 kV/in
          @Thickness 0.0630 in

          in oil; IEC 60243-1


          35.0 kV/mm
          @Thickness 0.800 mm

          889 kV/in
          @Thickness 0.0315 in

          in oil; IEC 60243-1

          Dissipation Factor耗散因數 

          0.0040
          @Frequency 50.0 - 60.0 Hz

          0.0040
          @Frequency 50.0 - 60.0 Hz

          IEC 60250


          0.0060
          @Frequency 1.00e+6 Hz

          0.0060
          @Frequency 1.00e+6 Hz

          IEC 60250

          Comparative Tracking Index跟蹤指數 

          250 - 400 V

          250 - 400 V

          PLC code 2; UL 746A

          Thermal Properties熱性能

          Metric公制數據

          English英制數據

          Comments測試方法

          CTE, linear, Parallel to Flow線性熱膨脹系數  

          75.0 μm/m-°C
          @Temperature -40.0 - 40.0 °C

          41.7 μin/in-°F
          @Temperature -40.0 - 104 °F

          ISO 11359-2


          80.0 μm/m-°C
          @Temperature 23.0 - 60.0 °C

          44.4 μin/in-°F
          @Temperature 73.4 - 140 °F

          ISO 11359-2

          CTE, linear, Transverse to Flow線性熱膨脹系數/橫向 

          75.0 μm/m-°C
          @Temperature -40.0 - 40.0 °C

          41.7 μin/in-°F
          @Temperature -40.0 - 104 °F

          ISO 11359-2


          80.0 μm/m-°C
          @Temperature 23.0 - 60.0 °C

          44.4 μin/in-°F
          @Temperature 73.4 - 140 °F

          ISO 11359-2

          Thermal Conductivity導熱系數 

          0.200 W/m-K

          1.39 BTU-in/hr-ft2-°F

          ISO 8302

          Deflection Temperature at熱變形溫度 0.46 MPa (66 psi) 

          90.0 °C

          194 °F

          Edgew 120*10*4 sp=100mm; ISO 75/Be

          Deflection Temperature at熱變形溫度 1.8 MPa (264 psi) 

          80.0 °C

          176 °F

          Edgew 120*10*4 sp=100mm; ISO 75/Ae

          Vicat Softening Point維卡軟化點 

          95.0 °C

          203 °F

          Rate B/50; ISO 306


          107 °C

          225 °F

          Rate B/120; ISO 306

          UL RTI, Electrical相對溫度指數 

          80.0 °C

          176 °F

          UL 746B

          UL RTI, Mechanical with Impact機械沖擊熱指數 

          70.0 °C

          158 °F

          UL 746B

          UL RTI, Mechanical without Impact無機械沖擊熱指數 

          80.0 °C

          176 °F

          UL 746B

          Flammability, UL94阻燃等級 

          V-2
          @Thickness 0.750 mm

          V-2
          @Thickness 0.0295 in

          UL 94


          V-0
          @Thickness 1.50 mm

          V-0
          @Thickness 0.0591 in

          UL 94


          5VB
          @Thickness 2.00 mm

          5VB
          @Thickness 0.0787 in

          UL 94

          Oxygen Index氧指數 

          32 %

          32 %

          LOI; ISO 4589

          Glow Wire Test灼熱絲試驗 

          960 °C
          @Thickness 3.20 mm

          1760 °F
          @Thickness 0.126 in

          Glow Wire Flammability Index; IEC 60695-2-12




          上一篇:PC/ABS(PC+ABS合金) C1200HF/沙伯基礎

          下一篇:pcabs(pc+abs合金) HCX1640/沙伯基礎(原料GE)

          欣隆全塑膠
          相關產品

          Related products

          推薦產品
          A级一片男女牲交
          <ruby id="5b91j"><em id="5b91j"><i id="5b91j"></i></em></ruby>
          <em id="5b91j"><b id="5b91j"></b></em>

            <em id="5b91j"><b id="5b91j"></b></em>

            <strike id="5b91j"><video id="5b91j"><cite id="5b91j"></cite></video></strike>
            <dl id="5b91j"><span id="5b91j"><del id="5b91j"></del></span></dl>

            <output id="5b91j"><pre id="5b91j"><delect id="5b91j"></delect></pre></output>

            <ruby id="5b91j"></ruby>

              <video id="5b91j"></video>

              <th id="5b91j"><pre id="5b91j"></pre></th>

                <menuitem id="5b91j"><p id="5b91j"></p></menuitem>