<ruby id="5b91j"><em id="5b91j"><i id="5b91j"></i></em></ruby>
<em id="5b91j"><b id="5b91j"></b></em>

    <em id="5b91j"><b id="5b91j"></b></em>

    <strike id="5b91j"><video id="5b91j"><cite id="5b91j"></cite></video></strike>
    <dl id="5b91j"><span id="5b91j"><del id="5b91j"></del></span></dl>

    <output id="5b91j"><pre id="5b91j"><delect id="5b91j"></delect></pre></output>

    <ruby id="5b91j"></ruby>

      <video id="5b91j"></video>

      <th id="5b91j"><pre id="5b91j"></pre></th>

        <menuitem id="5b91j"><p id="5b91j"></p></menuitem>

          LEXAN  915R PC/中高流動,良好的釋放性,UL94VO

          LEXAN 915R PC/中高流動,良好的釋放性,UL94VO_價格_物性_圖片_UL黃卡

          LEXAN 915R PC特性:具有中/高流動性和良好的釋放性,它的MVR為18(300°C / 1.2kg),UL94 [email protected],[email protected]??銷LEXAN 915R PC阻燃級系列塑料,隨貨提供PC 915R阻燃級系列價格,物性,圖片,UL黃卡.

          全國24小時銷售熱線:

          0769-83023208

          產品詳情

          LEXAN  915R PC/中高流動,良好的釋放性,UL94VO/塑料的特性:

          沙伯基礎SABIC塑料LEXAN 915R聚碳酸酯(PC)是一種可注射成型的非氯化和非溴化,未填充的阻燃級,具有中/高流動性和良好的釋放性, 它的MVR為18(300°C / 1.2kg),UL94 [email protected],有多種不透明顏色可供選擇。

          LEXAN  915R PC/中高流動,良好的釋放性,UL94VO/塑料的應用領域:

          電子器件外殼,車燈外殼,儀表板,打印機進紙板,打印機進紙導軌,電動工具外殼,商務儀器部件等.

          阻燃PC標準成型條件 -以下是具有代表性的成型條件:

          料管溫度(后部)

          260-280

          270-290

          料管溫度 (中央部)

          270-290

          280-300

          料管溫度 (前部)

          280-310

          280-300

          噴嘴溫度

          280-310

          280-300

          模具溫度

          80-110

          80-120

          射出圧力

          MPa

          50-150

          50-150

          螺桿回轉數

          rpm

          50-100

          50-100

          LEXAN  915R PC/PC中高流動,良好的釋放性,UL94VO/塑料的系列型號:

          LEXAN  LUX763CPC具有良好的擠出性能,良好的加工性,紫外線穩定性,非氯和非溴阻燃劑,UL
          LEXAN  LUX763CPC具有良好的擠出性能,良好的加工性,紫外線穩定性,非氯和非溴阻燃劑,UL
          LEXAN  LUX913CPC具有高流動性,良好的加工性,非氯和非溴阻燃,UL等級V-0
          LEXAN  LUX9130TPC具有良好的加工性,紫外線穩定,非氯和非溴阻燃,UL等級V-0和5VA。高透光
          LEXAN LUX9132CPC具有高流動性,良好的加工性,非氯和非溴阻燃,UL等級V-0。
          LEXAN LUX9136CPC具有高流動性,良好的加工性,非氯和非溴阻燃,UL等級V-0。
          LEXAN   ML6411PC抗沖改性PC樹脂與非溴化,非氯化阻燃體系。UL-94 V0和5V列出

          以下是沙伯基礎SABIC塑料LEXAN 915R PC物性表參數:

          PROPERTIES TYPICAL VALUESUNITSTEST METHODS
          MECHANICAL



          Tensile Stress, yield, 50 mm/min
          63MPaISO 527
          Tensile Stress, break, 50 mm/min
          60MPaISO 527
          Tensile Strain, yield, 50 mm/min
          6%ISO 527
          Tensile Strain, break, 50 mm/min
          85%ISO 527
          Tensile Modulus, 1 mm/min
          2350MPaISO 527
          Flexural Stress, yield, 2 mm/min
          90MPaISO 178
          Flexural Modulus, 2 mm/min
          2300MPaISO 178
          Ball Indentation Hardness, H358/30
          95MPaISO 2039-1
          IMPACT



          Izod Impact, unnotched 80*10*3 +23°C
          NBkJ/m2ISO 180/1U
          Izod Impact, unnotched 80*10*3 -30°C
          NBkJ/m2ISO 180/1U
          Izod Impact, notched 80*10*3 +23°C
          65kJ/m2ISO 180/1A
          Izod Impact, notched 80*10*3 -30°C
          11kJ/m2ISO 180/1A
          Charpy 23°C, V-notch Edgew 80*10*3 sp=62mm
          65kJ/m2ISO 179/1eA
          Charpy -30°C, V-notch Edgew 80*10*3 sp=62mm
          12kJ/m2ISO 179/1eA
          Charpy 23°C, Unnotch Edgew 80*10*3 sp=62mm
          NBkJ/m2ISO 179/1eU
          Charpy -30°C, Unnotch Edgew 80*10*3 sp=62mm
          NBkJ/m2ISO 179/1eU
          THERMAL



          Thermal Conductivity
          0.2W/m-°CISO 8302
          CTE, 23°C to 80°C, flow
          7.E-051/°CISO 11359-2
          CTE, 23°C to 80°C, xflow
          7.E-051/°CISO 11359-2
          Ball Pressure Test, 125°C +/- 2°C
          PASSES-IEC 60695-10-2
          Ball Pressure Test, approximate maximum
          135°CIEC 60695-10-2
          Vicat Softening Temp, Rate B/50
          140°CISO 306
          Vicat Softening Temp, Rate B/120
          141°CISO 306
          HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm
          122°CISO 75/Af
          HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm
          134°CISO 75/Bf
          HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm
          133°CISO 75/Be
          HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm
          122°CISO 75/Ae
          Relative Temp Index, Elec
          130°CUL 746B
          Relative Temp Index, Mech w/impact
          120°CUL 746B
          Relative Temp Index, Mech w/o impact
          125°CUL 746B
          PHYSICAL



          Mold Shrinkage on Tensile Bar, flow
          0.5-0.7%SABIC method
          Density
          1.2g/cm3ISO 1183
          Water Absorption, (23°C/sat)
          0.35%ISO 62
          Moisture Absorption (23°C / 50% RH)
          0.15%ISO 62
          Melt Volume Rate, MVR at 300°C/1.2 kg
          18cm3/10 minISO 1133
          ELECTRICAL



          Volume Resistivity
          >1.E+15Ohm-cmIEC 60093
          Surface Resistivity, ROA
          >1.E+15OhmIEC 60093
          Dielectric Strength, in oil, 3.2 mm
          17kV/mmIEC 60243-1
          Relative Permittivity, 1 MHz
          2.7-IEC 60250
          Dissipation Factor, 50/60 Hz
          0.001-IEC 60250
          Dissipation Factor, 1 MHz
          0.01-IEC 60250
          Comparative Tracking Index
          225VIEC 60112
          Relative Permittivity, 50/60 Hz
          2.7-IEC 60250
          FLAME CHARACTERISTICS



          UL Recognized, 94V-0 Flame Class Rating
          1.1mmUL 94
          Glow Wire Flammability Index 850°C, passes at
          1mmIEC 60695-2-12
          Glow Wire Flammability Index 960°C, passes at
          1.6mmIEC 60695-2-12
          Glow Wire Ignitability Temperature, 0.8 mm
          800°CIEC 60695-2-13
          Oxygen Index (LOI)
          35%ISO 4589
          Injection Molding



          Drying Temperature
          120°C
          Drying Time
          2-4hrs
          Maximum Moisture Content
          0.02%
          Melt Temperature
          280-300°C
          Nozzle Temperature
          270-290°C
          Front - Zone 3 Temperature
          280-300°C
          Middle - Zone 2 Temperature
          270-290°C
          Rear - Zone 1 Temperature
          260-280°C
          Hopper Temperature
          60-80°C
          Mold Temperature
          80-100°C




          上一篇:LEXAN PC 916R/阻燃級PC-注射成型,中高流動性,非溴化

          下一篇:PC 915AU/PC物性參數,非溴化,非氯化,抗紫外線

          欣隆全塑膠
          相關產品

          Related products

          推薦產品
          A级一片男女牲交
          <ruby id="5b91j"><em id="5b91j"><i id="5b91j"></i></em></ruby>
          <em id="5b91j"><b id="5b91j"></b></em>

            <em id="5b91j"><b id="5b91j"></b></em>

            <strike id="5b91j"><video id="5b91j"><cite id="5b91j"></cite></video></strike>
            <dl id="5b91j"><span id="5b91j"><del id="5b91j"></del></span></dl>

            <output id="5b91j"><pre id="5b91j"><delect id="5b91j"></delect></pre></output>

            <ruby id="5b91j"></ruby>

              <video id="5b91j"></video>

              <th id="5b91j"><pre id="5b91j"></pre></th>

                <menuitem id="5b91j"><p id="5b91j"></p></menuitem>