<ruby id="5b91j"><em id="5b91j"><i id="5b91j"></i></em></ruby>
<em id="5b91j"><b id="5b91j"></b></em>

    <em id="5b91j"><b id="5b91j"></b></em>

    <strike id="5b91j"><video id="5b91j"><cite id="5b91j"></cite></video></strike>
    <dl id="5b91j"><span id="5b91j"><del id="5b91j"></del></span></dl>

    <output id="5b91j"><pre id="5b91j"><delect id="5b91j"></delect></pre></output>

    <ruby id="5b91j"></ruby>

      <video id="5b91j"></video>

      <th id="5b91j"><pre id="5b91j"></pre></th>

        <menuitem id="5b91j"><p id="5b91j"></p></menuitem>

          LEXAN(沙伯基礎)LS1/PC(聚碳酸酯)

          LEXAN(沙伯基礎)LS1/PC(聚碳酸酯)_價格_物性_圖片_UL黃卡

          LEXAN LS1聚碳酸酯(PC)是一種UL評定HB為10/97, 建議在需要V-2等級時使用200系列.

          全國24小時銷售熱線:

          0769-83023208

          產品詳情

          ?                                                                              LEXAN(沙伯基礎)LS1/PC(聚碳酸酯)

                  沙伯基礎SABIC塑料LEXAN LS1聚碳酸酯(PC)是一種UL評定HB為10/97, 建議在需要V-2等級時使用200系列, 汽車鏡頭應用, 粘度低,紫外線穩定, 僅透明顏色。

          以下是LEXAN(沙伯基礎)LS1/PC(聚碳酸酯)物性表參數:

          SABIC Lexan? LS1(塑膠原料-聚碳酸酯-PC塑料)


          Material Notes:

          LEXAN LS1 is a low viscosity injection moulding grade especially designed for manufacturing complex parts requiring easy flow properties combined with high optical requirements.

          Physical Properties物理性質

          Metric公制數據

          English英制數據

          Comments測試方法

          Density密度 

          1.20 g/cc

          0.0434 lb/in3

          ISO 1183

          Moisture Absorption at Equilibrium吸濕平衡 

          0.15 %

          0.15 %

          23°C / 50% RH; ISO 62

          Water Absorption at Saturation吸水率 

          0.35 %
          @Temperature 23.0 °C

          0.35 %
          @Temperature 73.4 °F

          ISO 62

          Linear Mold Shrinkage, Flow線性收縮率/流動 

          0.0050 - 0.0070 cm/cm

          0.0050 - 0.0070 in/in

          on tensile bar; SABIC Method

          Melt Flow熔體流動速率 

          21 g/10 min
          @Load 1.20 kg,
          Temperature 300 °C

          21 g/10 min
          @Load 2.65 lb,
          Temperature 572 °F

          [cm^3/10 min] Melt Volume Rate; ISO 1133

          Mechanical Properties力學性能

          Metric公制數據

          English英制數據

          Comments測試方法

          Hardness,硬度 H358/30 

          95.0 MPa

          13800 psi

          ISO 2039-1

          Tensile Strength at Break斷裂拉伸強度 

          70.0 MPa

          10200 psi

          50 mm/min; ISO 527

          Tensile Strength, Yield屈服拉伸強度 

          63.0 MPa

          9140 psi

          50 mm/min; ISO 527

          Elongation at Break斷裂伸長率 

          100 %

          100 %

          50 mm/min; ISO 527

          Elongation at Yield屈服伸長率 

          6.0 %

          6.0 %

          50 mm/min; ISO 527

          Tensile Modulus拉伸模量 

          2.35 GPa

          341 ksi

          1 mm/min; ISO 527

          Flexural Yield Strength彎曲屈服強度 

          90.0 MPa

          13100 psi

          2 mm/min; ISO 178

          Flexural Modulus彎曲彈性模量 

          2.30 GPa

          334 ksi

          2 mm/min; ISO 178

          Izod Impact, Notched懸臂梁缺口沖擊強度 (ISO)  

          11.0 kJ/m2
          @Temperature -30.0 °C

          5.23 ft-lb/in2
          @Temperature -22.0 °F

          80*10*3; ISO 180/1A


          65.0 kJ/m2
          @Temperature 23.0 °C

          30.9 ft-lb/in2
          @Temperature 73.4 °F

          80*10*3; ISO 180/1A

          Izod Impact, Unnotched懸臂梁無缺口沖擊強度 (ISO) 

          NB
          @Temperature 23.0 °C

          NB
          @Temperature 73.4 °F

          80*10*3; ISO 180/1U


          NB
          @Temperature -30.0 °C

          NB
          @Temperature -22.0 °F

          80*10*3; ISO 180/1U

          Charpy Impact Unnotched夏比缺口試樣沖擊 

          NB
          @Temperature 23.0 °C

          NB
          @Temperature 73.4 °F

          Edgew 80*10*3 sp=62mm; ISO 179/1eU


          NB
          @Temperature -30.0 °C

          NB
          @Temperature -22.0 °F

          Edgew 80*10*3 sp=62mm; ISO 179/1eU

          Charpy Impact, Notched夏比缺口沖擊 

          1.20 J/cm2
          @Temperature -30.0 °C

          5.71 ft-lb/in2
          @Temperature -22.0 °F

          V-notch Edgew 80*10*3 sp=62mm; ISO 179/1eA


          6.50 J/cm2
          @Temperature 23.0 °C

          30.9 ft-lb/in2
          @Temperature 73.4 °F

          V-notch Edgew 80*10*3 sp=62mm; ISO 179/1eA

          Taber Abrasion, mg/1000 Cycles周期泰伯磨耗 

          10
          @Load 1.00 kg

          10
          @Load 2.20 lb

          CS-17; SABIC Method

          Electrical Properties電性能

          Metric公制數據

          English英制數據

          Comments測試方法

          Volume ResiSTivity體積電阻率 

          >= 1.00e+15 ohm-cm

          >= 1.00e+15 ohm-cm

          IEC 60093

          Surface Resistance表面電阻 

          >= 1.00e+15 ohm

          >= 1.00e+15 ohm

          ROA; IEC 60093

          Dielectric Constant介電常數 

          2.7
          @Frequency 1.00e+6 Hz

          2.7
          @Frequency 1.00e+6 Hz

          IEC 60250


          2.7
          @Frequency 50.0 - 60.0 Hz

          2.7
          @Frequency 50.0 - 60.0 Hz

          IEC 60250

          Dielectric Strength介電強度 

          17.0 kV/mm
          @Thickness 3.20 mm

          432 kV/in
          @Thickness 0.126 in

          in oil; IEC 60243-1

          Dissipation Factor耗散因數 

          0.0010
          @Frequency 50.0 - 60.0 Hz

          0.0010
          @Frequency 50.0 - 60.0 Hz

          IEC 60250


          0.010
          @Frequency 1.00e+6 Hz

          0.010
          @Frequency 1.00e+6 Hz

          IEC 60250

          Thermal Properties熱性能

          Metric公制數據

          English英制數據

          Comments測試方法

          CTE, linear, Parallel to Flow線性熱膨脹系數 

          70.0 μm/m-°C
          @Temperature 23.0 - 80.0 °C

          38.9 μin/in-°F
          @Temperature 73.4 - 176 °F

          ISO 11359-2

          Thermal Conductivity導熱系數 

          0.200 W/m-K

          1.39 BTU-in/hr-ft2-°F

          ISO 8302

          Deflection Temperature at熱變形溫度 0.46 MPa (66 psi) 

          133 °C

          271 °F

          Edgew 120*10*4 sp=100mm; ISO 75/Be

          Deflection Temperature at熱變形溫度 1.8 MPa (264 psi) 

          122 °C

          252 °F

          Edgew 120*10*4 sp=100mm; ISO 75/Ae

          Vicat Softening Point維卡軟化點 

          140 °C

          284 °F

          Rate B/50; ISO 306


          141 °C

          286 °F

          Rate B/120; ISO 306

          UL RTI, Electrical 相對溫度指數

          130 °C

          266 °F

          UL 746B

          UL RTI, Mechanical with Impact 機械沖擊熱指數

          125 °C

          257 °F

          UL 746B

          UL RTI, Mechanical without Impact 無機械沖擊熱指數

          125 °C

          257 °F

          UL 746B

          Flammability, UL94阻燃等級  

          HB
          @Thickness 0.750 mm

          HB
          @Thickness 0.0295 in

          UL 94


          HB
          @Thickness 3.00 mm

          HB
          @Thickness 0.118 in

          2nd value; UL 94

          Oxygen Index氧指數 

          25 %

          25 %

          LOI; ISO 4589

          Glow Wire Test灼熱絲測試 

          850 °C
          @Thickness 1.00 mm

          1560 °F
          @Thickness 0.0394 in

          Glow Wire Flammability Index; IEC 60695-2-12

          Optical Properties光學性質

          Metric公制數據

          English英制數據

          Comments測試方法

          ReFRactive Index折射率 

          1.586

          1.586

          ISO 489

          Haze霧度 

          <= 0.80 %
          @Thickness 2.54 mm

          <= 0.80 %
          @Thickness 0.100 in

          ASTM D 1003

          TRansmission, Visible透光率 

          88 - 90 %
          @Thickness 2.54 mm

          88 - 90 %
          @Thickness 0.100 in

          ASTM D 1003





          上一篇:沙伯基礎創新耐寒PC系列

          下一篇:PC GSV2030R2日本三菱

          欣隆全塑膠
          相關產品

          Related products

          推薦產品
          A级一片男女牲交
          <ruby id="5b91j"><em id="5b91j"><i id="5b91j"></i></em></ruby>
          <em id="5b91j"><b id="5b91j"></b></em>

            <em id="5b91j"><b id="5b91j"></b></em>

            <strike id="5b91j"><video id="5b91j"><cite id="5b91j"></cite></video></strike>
            <dl id="5b91j"><span id="5b91j"><del id="5b91j"></del></span></dl>

            <output id="5b91j"><pre id="5b91j"><delect id="5b91j"></delect></pre></output>

            <ruby id="5b91j"></ruby>

              <video id="5b91j"></video>

              <th id="5b91j"><pre id="5b91j"></pre></th>

                <menuitem id="5b91j"><p id="5b91j"></p></menuitem>