<ruby id="5b91j"><em id="5b91j"><i id="5b91j"></i></em></ruby>
<em id="5b91j"><b id="5b91j"></b></em>

    <em id="5b91j"><b id="5b91j"></b></em>

    <strike id="5b91j"><video id="5b91j"><cite id="5b91j"></cite></video></strike>
    <dl id="5b91j"><span id="5b91j"><del id="5b91j"></del></span></dl>

    <output id="5b91j"><pre id="5b91j"><delect id="5b91j"></delect></pre></output>

    <ruby id="5b91j"></ruby>

      <video id="5b91j"></video>

      <th id="5b91j"><pre id="5b91j"></pre></th>

        <menuitem id="5b91j"><p id="5b91j"></p></menuitem>

          PC(聚碳酸酯)EXL6013/沙伯基礎(SABIC)

          PC(聚碳酸酯)EXL6013/沙伯基礎(SABIC)_價格_物性_圖片_UL黃卡

          公司主營產品:耐高溫塑料,耐低溫塑料,耐磨塑料,耐熱塑料,耐寒塑料,防火塑料,加纖塑料,醫療級/食品級塑料,抗紫外線塑料,紅外線穿透塑料...

          全國24小時銷售熱線:

          0769-83023208

          產品詳情

          ?            SABIC(沙伯基礎創新塑料)LEXAN PC EXL6013是專為要求具有高沖擊性能和優于標準聚碳酸酯的耐化學性的應用而開發的。

          以下是SABIC沙伯基礎創新Lexan PC EXL6013中英文物性表資料:

          PROPERTIES TYPICAL VALUESUNITSTEST METHODS
          MECHANICAL



          Taber Abrasion, CS-17, 1 kg
          10mg/1000cySABIC method
          Tensile Stress, yield, 50 mm/min
          55MPaISO 527
          Tensile Stress, break, 50 mm/min
          60MPaISO 527
          Tensile Strain, yield, 50 mm/min
          7%ISO 527
          Tensile Strain, break, 50 mm/min
          100%ISO 527
          Tensile Modulus, 1 mm/min
          2100MPaISO 527
          Flexural Stress, yield, 2 mm/min
          80MPaISO 178
          Flexural Modulus, 2 mm/min
          2150MPaISO 178
          Ball Indentation Hardness, H358/30
          90MPaISO 2039-1
          IMPACT



          Izod Impact, unnotched 80*10*3 +23°C
          NBkJ/m2ISO 180/1U
          Izod Impact, unnotched 80*10*3 -30°C
          NBkJ/m2ISO 180/1U
          Izod Impact, notched 80*10*3 +23°C
          70kJ/m2ISO 180/1A
          Izod Impact, notched 80*10*3 -30°C
          60kJ/m2ISO 180/1A
          Charpy 23°C, V-notch Edgew 80*10*3 sp=62mm
          75kJ/m2ISO 179/1eA
          Charpy -30°C, V-notch Edgew 80*10*3 sp=62mm
          70kJ/m2ISO 179/1eA
          Charpy 23°C, Unnotch Edgew 80*10*3 sp=62mm
          NBkJ/m2ISO 179/1eU
          Charpy -30°C, Unnotch Edgew 80*10*3 sp=62mm
          NBkJ/m2ISO 179/1eU
          THERMAL



          Thermal Conductivity
          0.2W/m-°CISO 8302
          CTE, 23°C to 80°C, flow
          7.E-051/°CISO 11359-2
          CTE, 23°C to 80°C, xflow
          7.E-051/°CISO 11359-2
          Ball Pressure Test, 125°C +/- 2°C
          PASSES-IEC 60695-10-2
          Vicat Softening Temp, Rate B/50
          138°CISO 306
          Vicat Softening Temp, Rate B/120
          140°CISO 306
          HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm
          131°CISO 75/Be
          HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm
          122°CISO 75/Ae
          PHYSICAL



          Mold Shrinkage on Tensile Bar, flow
          0.6-0.8%SABIC method
          Density
          1.2g/cm3ISO 1183
          Water Absorption, (23°C/saturated)
          0.35%ISO 62-1
          Moisture Absorption (23°C / 50% RH)
          0.15%ISO 62
          Melt Volume Rate, MVR at 300°C/1.2 kg
          5cm3/10 minISO 1133
          ELECTRICAL



          Volume Resistivity
          >1.E+15Ohm-cmIEC 60093
          Surface Resistivity, ROA
          >1.E+15OhmIEC 60093
          Dielectric Strength, in oil, 3.2 mm
          17kV/mmIEC 60243-1
          Relative Permittivity, 1 MHz
          2.7-IEC 60250
          Dissipation Factor, 50/60 Hz
          0.001-IEC 60250
          Dissipation Factor, 1 MHz
          0.01-IEC 60250
          Comparative Tracking Index
          175VIEC 60112
          Relative Permittivity, 50/60 Hz
          2.7-IEC 60250
          FLAME CHARACTERISTICS



          Glow Wire Flammability Index 850°C, passes at
          1mmIEC 60695-2-12
          Injection Molding



          Drying Temperature
          120°C
          Drying Time
          2-4hrs
          Maximum Moisture Content
          0.02%
          Melt Temperature
          290-320°C
          Nozzle Temperature
          280-310°C
          Front - Zone 3 Temperature
          290-320°C
          Middle - Zone 2 Temperature
          280-310°C
          Rear - Zone 1 Temperature
          270-300°C
          Hopper Temperature
          60-80°C
          Mold Temperature
          80-120°C



          上一篇:PC(聚碳酸酯)EXL5429/沙伯基礎(SABIC)

          下一篇:PC(聚碳酸酯)EXL1444/沙伯基礎(SABIC)

          欣隆全塑膠
          相關產品

          Related products

          推薦產品
          A级一片男女牲交
          <ruby id="5b91j"><em id="5b91j"><i id="5b91j"></i></em></ruby>
          <em id="5b91j"><b id="5b91j"></b></em>

            <em id="5b91j"><b id="5b91j"></b></em>

            <strike id="5b91j"><video id="5b91j"><cite id="5b91j"></cite></video></strike>
            <dl id="5b91j"><span id="5b91j"><del id="5b91j"></del></span></dl>

            <output id="5b91j"><pre id="5b91j"><delect id="5b91j"></delect></pre></output>

            <ruby id="5b91j"></ruby>

              <video id="5b91j"></video>

              <th id="5b91j"><pre id="5b91j"></pre></th>

                <menuitem id="5b91j"><p id="5b91j"></p></menuitem>